How to add quizzes and knowledge checks to a course in Continuum Learn

In short

In Continuum Learn, you add a Quiz block to a lesson, write multiple-choice questions, set a pass mark and whether learners can retake it, and read the scores under Manage > Reporting. A lesson can also require a quiz pass before it counts as complete.

A quiz lets you test what learners have taken in. You add a Quiz block to a lesson, write the questions, and choose how it is scored. Every submitted attempt is recorded, so you can see scores and pass rates in your reports.

Who can do this: team admins and authors build quizzes. Admins see results under Manage > Reporting, and presenters see them for their own courses.

Publications do not support quizzes. Quizzes are for the Course and Scheduled course types. See Course settings.

Add a quiz to a lesson

  1. Open the lesson page: in the course editor, open the lesson's three-dot menu and choose Edit. See Build your first course.
  2. Add a row, click Set Content Type, and in the Add Content panel choose the Knowledge category, then Quiz.
  3. The quiz settings window opens. Build your questions on the Questions tab (below).
  4. Click Save in the window, then Save on the lesson toolbar.

The block shows learners an intro page with the quiz title, a description and a start button.

Write the questions

The Questions tab lists your questions on the left, with the selected one on the right.

  • Add question adds a new multiple-choice question.
  • Add info page adds a page of text between questions, for example an instruction or a short reminder. Info pages are not scored.
  • Hover over a question to see arrows to move it up or down, and a bin to delete it.
  • Generate with AI drafts a quiz from the lesson's own content. It replaces your existing questions (it asks you to confirm first) and only works from content you have already saved in the lesson.

Always check AI-generated questions for accuracy before you publish.

Multiple-choice questions

Every question is multiple choice. For each one:

  1. Type the question in the Question box. It is a rich-text editor, so you can add formatting.
  2. Each answer has a text box and a Correct tick box. A new question starts with Choice 1 (correct) and Choice 2.
  3. Click Add Answer for more options, or the bin beside an answer to remove it.
  4. Tick Correct on every right answer. You can tick more than one.

When a question has several correct answers, learners pick that many: they are told "Please select N answers" if they pick too few, and they cannot select more than that number. A question with one correct answer is a single choice.

The Type drop-down above the question can switch it between Question and Information, which is the same as an info page.

Explanations

Under the answers, Explanation (optional) is where you say why the right answer is right. Learners see it on the review screen after they submit, if you turn the review on (see Review below). Question-bank questions can have explanations too. See Quiz answers and explanations.

Quiz title and description

On the Intro tab, enter a Quiz title and a Quiz description. Learners see these before they start.

Quiz Settings

The Quiz Settings tab has four sections.

Start button

  • Button text: the label on the start button. If you leave it empty, learners see "Start Quiz".
  • Full width: stretches the button across the column.
  • Customise colours: reveals Text colour and Background colour pickers for the button.

Scoring

Setting What it does
Allow retake When on, a learner who did not pass can try again. When off, they get one attempt.
Pass required When on, the learner must reach the Pass score % to pass. When off, the quiz is not a gate: submitting it counts as a pass whatever the score.
Pass score % The score, from 0 to 100, needed to pass when Pass required is on. Enter a value; if you leave it empty the pass mark is effectively 0%.

How the score works:

  • The score is the number of correct answers the learner selected, divided by the total number of correct answers across the whole quiz, as a percentage.
  • A question with several correct answers therefore counts for more than a single-answer question.
  • Picking a wrong answer does not subtract marks, but it does use up one of the learner's selections on that question.
  • A question scores nothing if more answers were submitted for it than it has correct answers. Learners cannot do this through the quiz itself, which stops them at that number.
  • Info pages are not scored.

Review

Show answers and explanations decides whether learners can open a review screen after they submit, listing every question, what they answered, the correct answers and your explanation.

Option What learners see
Never (the default) Only their score.
After passing The review once they pass, or after a failed attempt when no retake is allowed.
After every attempt The review after each attempt, passed or not.

For an assessment with retakes, choose After passing, so learners can't read the answers and then retake. Learners who come back to the lesson later see their latest score and, when allowed, a Review answers button. The full guide, with what learners see, is Quiz answers and explanations.

Question bank

You can add questions from a bank to the questions you wrote by hand.

  • Include questions from a bank: switch it on to use banks.
  • Question banks: choose one or more banks from the list.
  • Number of bank questions per attempt: how many bank questions to draw at random each time a learner starts. Leave it empty to use every question from the selected banks.

Because bank questions are drawn at random, learners who retake the quiz may see different questions from the bank. Questions you wrote directly in the quiz are always included.

What learners see

  1. The intro page, then Start Quiz (or your button text).
  2. Questions one at a time, headed "Question 1 of N", with Previous and Next buttons. They choose their answers and move on; correct answers are not revealed as they go.
  3. Submit on the last question, which grades the quiz.
  4. A results page. If they passed, they see a congratulations message with their percentage and a Return to course button. If they did not, they see their percentage and, if Allow retake is on, a Take again button.
  5. If the quiz allows it (see Review), a Review your answers button that opens a review of the attempt. See Quiz answers and explanations.

A learner who has already passed a quiz cannot start it again. A learner who failed cannot retake it unless Allow retake is on.

In a course lesson, a quiz is graded on the server, so its correct answers and explanations are never sent to the learner's browser before they submit. A quiz placed on a custom website page (outside a course) is marked in the visitor's browser instead, so its answers can be read by anyone who looks at the page source: use it for practice, not for an assessment.

Quizzes and lesson completion

A quiz only counts as complete for a learner once they have passed it. Once they pass, that part of the lesson is tracked as done, which feeds the lesson and course progress.

You can also tie a lesson's completion to the quiz:

  1. In the course editor, open the lesson's three-dot menu and choose Settings.
  2. Tick Require quiz pass to complete this lesson. It only applies if the lesson contains a quiz.

With that ticked, a lesson with a quiz is not treated as complete for Sequential progression until the learner has a passing attempt, so the next lesson stays locked. See Progression in Course settings. This setting affects unlocking; it does not retrospectively un-complete a course for learners who had already finished it.

Previewing a quiz

Click Preview on the lesson toolbar to try the quiz yourself, including the review screen. Team admins and authors who are not enrolled in the course are treated as observers: they can take the quiz, but nothing is saved, no results are recorded and no completion is triggered. If you are enrolled in the course yourself, or the course is open access, your attempt is saved like a learner's. Use a test learner account if you want to see an attempt appear in your reports.

See the results

Go to Manage > Reporting, open the course's results and choose the Quizzes tab. You will see attempts, users, pass rate and average score, a question-by-question breakdown of how many people got each right, and a list of every submitted attempt with name, score, pass or fail and date. The learner report CSV also includes quiz attempts, quizzes passed and average best score. Full details are in Reporting.

Knowledge checks

Continuum also has a single-question "knowledge check" component, which is the same question format used inside the quiz. At the moment the Quiz block is the one offered in the Knowledge category of Add Content, alongside the Survey block (see Surveys). If you want learners to answer a quick check-your-understanding question, add a short quiz with a few questions and leave Pass required off, so it is practice rather than a gate.

Frequently asked questions

Can learners see which answers were right?

Only if you allow it. The correct answers are never revealed while they take the quiz. Afterwards, the Show answers and explanations setting decides whether they can see each question with the correct answers and your explanations; by default they only see their percentage and pass or fail. See Quiz answers and explanations. You can always see the per-question results in reporting.

I added explanations and my translated quiz is back in English.

A translated quiz is shown in another language only when every part of it is translated. Adding or changing an explanation changes the quiz, so learners see the source-language quiz until you translate the course again. See Translate a course.

Can I stop learners moving on until they pass?

Yes. Turn on Pass required with a Pass score %, then tick Require quiz pass to complete this lesson on the lesson and set the course Progression to Sequential.

A learner failed and cannot try again.

Allow retake is off for that quiz. Turn it on in Quiz Settings and they can try again.

Do quizzes work in SCORM exports?

Yes. In a SCORM package, quizzes run inside the package and report a score out of 100 to the other LMS. The package shows straight after each question whether the answer was right and, if not, which answer was correct, whatever the quiz's settings. Explanations and the end-of-quiz review follow the quiz's Show answers and explanations setting. Question-bank questions are not included in a package. See Embed and SCORM. Server-side attempts and the Continuum reports described here apply to courses running on your Continuum site.

Can the AI tutor give learners the quiz answers?

No answer key is ever sent to it. Quizzes, choice questions and question banks are left out of what the AI tutor reads, it is told never to answer assessment questions, and a quiz question pasted in word for word is refused without reaching the AI. A learner can still reword a question, so worked answers you write in ordinary lesson text are fair game: leave those lessons out of the tutor if that matters.

Why did my edited quiz not change an earlier attempt?

Each attempt stores a snapshot of the questions the learner was given, so changing a quiz afterwards does not alter past attempts. That includes explanations: one you add later appears in the review of new attempts only.

More guides

  • Build your first courseCreate a course, add modules and lessons, lay out content with rows and columns, preview it as a learner and make it available to your learners.
  • ProgrammesGroup courses into a programme, choose which are required or optional, and award one certificate automatically when a learner completes the set.
  • Content blocksA reference of every content block you can add to a lesson in the course editor, what each one does, and the settings you can change.
  • Learning pathsPut a programme's courses in order so each one opens only when the one before it is complete, let learners see the whole path from day one, and sell or assign it as one thing.
  • SurveysBuild a survey once, place it inside any lesson or ask it when a learner finishes a course, then read the results and export them to CSV.
  • Course settingsEvery tab and field in the course settings panel, from title and the course page to access, learner tools, certificates, scheduling, topics, languages and selling.
  • CertificatesDesign certificate templates, switch certificates on for a course, print CPD hours and expiry dates, and let anyone verify a certificate online.
  • Digital badgesGive learners a digitally signed Open Badges 3.0 credential for a course or programme that they can share on LinkedIn and employers can verify in one click.
  • Quiz answers and explanationsWrite an explanation for each quiz question and choose whether learners can review their answers, the correct answers and your explanations after an attempt.
  • Presenters and discussionAdd presenter profiles to your courses, give presenters their own area, and let learners ask questions on a moderated course discussion board.
  • Course stylesChoose a look, accent colour, fonts, dividers and navigation style for a course, and set the text colours used over coloured rows and columns.
  • Using your digital badgeAdd your digital badge to LinkedIn, put the verification link on your CV, use it as CPD evidence for appraisal or revalidation, and keep it in a badge wallet.
  • Present (presenter area)Follow learners, check results, confirm attendance, sign off learners and answer questions, as a presenter, admin or author.
  • Live eventsCreate a live event, stream to it from OBS or your browser, sell access and let learners watch the replay afterwards.
  • Zoom sessionsConnect your Zoom account, add a Zoom session to a lesson, and track who joined or attended so the lesson completes automatically.
  • Live lessonsAdd a Live Lesson block to a course, go live from your browser or OBS, and let learners watch, chat and complete the lesson.
  • AI tutor for learnersLet enrolled learners ask questions about a course and get short answers written only from that course's lesson text, with links to the lessons the answer came from.
  • LanguagesTurn on extra languages, translate your courses with AI or by hand, and translate the text you write yourself, so each learner sees Continuum in their own language.
  • Build with AITurn a topic or your own documents into a draft course, review the outline, and edit the result. Also covers AI quizzes, images, JSON import and your AI allowance.
  • Choosing a website routeCompare the four ways to show Continuum on your own website (catalogue embed, publication embed, WordPress plugin and API) and pick the one that fits.
  • Website embedsUse the Website embeds generator to put live course cards, events, buy buttons or a whole publication on Wix, Squarespace, Webflow, WordPress or any website.
  • Publications on your websiteTurn a guide, handbook or fact sheet into a Publication, then show it on your own website with a copy-and-paste embed, through the API or in WordPress.
  • Translate a courseAdd a language to a course, translate it with AI, check and correct the text, keep it up to date, and see what learners get.
  • WordPressInstall the Continuum Connect plugin, show your courses and events on WordPress pages, add buy buttons and let members sign in once.
  • SCORM exportExport any course as a SCORM 1.2 or 2004 package to run in another LMS, with completion, scores and resume reported back to that LMS.
  • SSO and 2FAConnect your organisation's identity provider over OpenID Connect, decide who must use it, and set two-factor rules for each role.
  • SellingConnect your Stripe account, price courses, build bundles, set your terms of sale, and manage orders and refunds from one place.
  • Selling currencyChoose the one currency your portal sells in, what changes when you switch, what your buyers see, and how payouts and tax work for sellers outside the UK.
  • API keysCreate a named, scoped API key for the Continuum Learn API, copy it safely, choose its scopes and expiry, see when it was last used, revoke it, and understand the older v1 team key.
  • ReportingFind the right report for your question, filter it, understand every column and export it to CSV, from course progress to quiz, survey and programme results.
  • Branding and domainAdd your logo and colours, set up your header and footer, choose a courses or video focus, and point your own web address at your learning site.
  • WebhooksAdd a webhook endpoint so Continuum Learn tells your membership system or CRM when someone joins, enrols, completes a course, gets a certificate or places an order, then test it, read the delivery log and redeliver.
  • Groups and cohortsLearn the difference between groups and cohorts, then use groups to assign courses and cohorts to build saved lists for notifications and CSV exports.
  • Recurring trainingMake learners complete a course and then repeat it every year or on a fixed date, chase them with reminders, escalate to line managers, and see who is compliant in one matrix.
  • My team (line managers)See how the people who report to you are getting on, check their course results, certificates and required training, and send them a reminder.

Want to see it working on your own courses?

Book a short demo and we will walk you through it.